Lemoyne, Pa. May 12, 2021 – Homeowners, building owners, contractors and managers can now work safely on standing seam roofs without worrying about damage to panels. The Standing Seam system uses superior anchorage attachment, certified at an independent ISO 17025/ANSI Z359.18 certified materials testing facility. A wide variety of Standing Seam Roof Anchor (SSRA) systems are available for immediate purchase.

Capable of withstanding 14,500 pounds, the SSRA far outstrips the required 5,000 pounds specified by OSHA and ANSI. When the system did ultimately fail, the attachment bolts sheared, leaving the panel itself completely unharmed. (Test anchor body was made of aluminum.) Nearly 10,000 pounds above the required limit and thousands of pounds above all other manufacturers, the Standing Seam Roof Anchor is an inimitable product.

Despite the massive load-bearing capacity and fall protection, however, the SSRA isn’t heavy at all. In fact, an anchor made for one person weighs only 4.5 pounds. That makes it simultaneously both the strongest and the lightest one ever made. It is easy to adjust and move, making it the ideal choice for either temporary or permanent attachment.

No need to buy different products for different jobs or job sites, however. The Standing Seam Roof Anchor boasts a universal design, and therefore works on more than 500 different panel types. These official “panel profiles” included t-seams, bulb seams, SnapLok, single lok, double lok, MR-24 and more. In addition to strongest and lightest, the SSRA is also the most widely applicable. Users can take it from roof to roof without the need to switch out parts, reassemble it or use different systems completely. Consequently, the savings in time, money and effort are considerable.

Components also withstand the test of time. Made of heavily tested stainless steel and aluminum materials, the anchor withstands salt spray and other adverse weather. It takes well to powder coating, so it’s simple to blend permanent anchor installations into the surrounding roof color. The low-profile attachment makes fixed installations even harder to see. This also minimizes tripping.

Another noteworthy characteristic of the Standing Seam Roof Anchor is its ability to withstand the full 5,000 pounds required in every direction of pull. That means workers can count on the roof anchor to prevent accident or injury no matter where they are in relation to the anchor. Working downward, to either side, upward or even up and over the top of the roof, the anchor provides equal protection. That minimizes the need for workers to adjust their anchors on the job. Instead, it gives them freedom of movement to focus on the task at hand.

The SSRA system isn’t just for people. Because it can handle such large loads, it is also ideal for devices and machinery. Users can attach walk boards, SRLs, ladders, horizontal lifelines and roof jacks with equal ease. Get anchors for everyone in the crew as well as all heavy tools frequently in use, and trust to them to keep the jobsite safe for everyone – and every expensive piece of equipment.

Minimize scratching when frequently attaching or detaching the Standing Seam Roof Anchor with recommended Nylon Tipped Set Screws. This will keep roofs looking nice for years to come. These work just as well with the patented universal fit design of the SSRA, and are reusable over and over again. Installation requires nothing more than a torque wrench that reads to inches per pounds, as well as a 3/16-inch hex bit socket. Nothing could be simpler.

The website makes it easy to reorder screws, pair robes and shock absorbers with the SSRA system, and find an appropriate torque wrench, if contractors and workers don’t already have one on hand.

Roofers looking to support American industry will find the Standing Seam Roof Anchor a bonus as well. It’s made in the United States with a Lifetime Life Saving Warranty. Users never again have to worry about paying for a replacement, and profits go to support American businesses. The Standing Seam Roof Anchor is available in a significant number of options, from different attachments to contractor kits that include multiple anchors. Visit www.fallpd.com to learn more today.

Back in the 1970s, metal roofing first made its debut as an option for commercial and residential homes. The first winter after the first installation, every new roof dumped a load of ice and snow on unsuspecting pedestrians. There was an immediate need for snow guards. SnoBlox-SnoJax went into business manufacturing snow guards for metal roofing and continues to serve satisfied customers across the country to this day.

Today, SnoBlox-SnoJax produces its original clear polycarbonate snow guards. The simple design blends in with the colorful metal roof while slowing the slide of ice and snow. Each guard is fastened to the metal roof using screws or adhesive and can hold back up to four tons of ice and snow. They are shaped like a bookend with a six-inch vertical plate able to catch falling and sliding snow. Once the snow is halted, it has a chance to melt instead of falling in a potentially dangerous heap. The snow guards are installed by a metal roofing company, a different contractor, or the homeowner when following all recommended guidelines. They are an affordable solution to an annual problem, costing under five dollars for each piece.

If ice sheets are more of a problem in a particular area, SnoBlox-SnoJax also offers their Snowbreakers product. The triangular unit works to break up sheets of ice and snow with their angular design. Instead of sharp and even deadly amounts of ice racing down the roof, the Snowbreakers crack and shatter the sheets. A pedestrian may only experience a quick shower of ice and snow. When used in combination with the Snoblox snow guards, the property owner sees a significant reduction in dangerous sheets landing in walkways, parking lots, and on people.

Some property owners demanded yet another option to the Snoblox and Snowbreakers systems which attach to the flat areas between the ribs of a metal roof. In 2016, the company bought Action Manufacturing LLC and their line of Colorbar and Snobar products. A Snobar comes in six-foot-wide sections and can clamp onto standing seam metal roofs. They offer a faster installation compared to the Snoblox system and can be ordered in a matching powder coat color for a near-invisible appearance. These units can hold back over a foot of snow while allowing melting ice and snow to continue to slowly and safely drip off the roof. Now customers, clients, and homeowners can walk out from under their metal roof without fearing the next mini avalanche.

Interested commercial and residential contractors and property owners can order the complete range of SnoBlox-SnoJax products directly from their website at snoblox-snojax.com or through a local authorized distributor and reseller. Customers can also contact them through their Facebook and Instagram pages.

SnoBlox-SnoJax remains committed to producing quality systems that work with and support current metal roofing technologies and installation procedures. Their line of products has changed in manufacture and material since its inception, improving durability and function without becoming exorbitantly expensive. The company was first formed by Jack McMullen and is still run by his son, the current CEO and President, Brion P. McMullen.

SnoBlox-SnoJax has been producing quality aftermarket snow guards for metal roofing since 1976. Their products are still Made in America, come with a lifetime no-fine-print warranty, and continue to evolve with the changing market and materials in the metal roofing industry. Their products are available wholesale to certified roofing installers and individual homeowners and contractors.